Description
The R85-DS is an ESD steel zinc conveyor track mount with a 1-5/16 in drop stopper. This mount will make your roller track tilted so that it makes a small angle, even if the pipes are parallel to the track. Use this part as an end mount to make heavyweight containers stops.
When you are using lightweight containers, you won’t need an angle that creates too much acceleration, so we recommend using R85-TS.
The anchoring section has two little bumps to make sure the support grips the tube firmly. We recommend using an F-A85/8 screw to secure the support on the pipe.
All conveyor R85 accessories are engineered to perfectly fit the R85-RT96.
The roller track and its accessories will work on any 28 mm pipe and joint systems. Some systems don’t have the same conveyor size, so be sure to check the spec sheet to see if your old conveyor parts are compatible.
Every part of the conveyor system is ESD, allowing you to build anti-static structures for the transportation of electronics and electrical components.
