Nichols Material Handling

Home/Shop/Starter Kits/Flow-Kit
Contains all the tubes, conveyors, joint sets, casters, and accessories needed to build up to 4 or 5 flexible structures according to your needs. Best way to ease your team into using our tube and joint system.

Flow-Kit

$2,260.94

Contains all the tubes, conveyors, joint sets, casters, and accessories needed to build up to 4 or 5 flexible structures according to your needs.

The R40-MS is an ESD steel zinc conveyor mount commonly used at the starting point of roller tracks. This item serves as an anchor between the conveyor and a perpendicular pipe.
42 × R40-MS
$2.46
The R40-TS is an ESD steel zinc conveyor track mount with a 1 1/8 in welded tab stopper. Use this part as an end mount to make lightweight container stops.
4 × R40-TS
$2.85
Track Mount Drop Stop Steel Zinc.
42 × R40-DS
$2.74
The R40-TC is an ESD metal track connector to make conveyor extensions. You can use this part to extend an 8-foot track up to 16ft.
4 × R40-TC
$2.85
Black Tee Joint
180 × H-1
$0.92
Black Inner Corner Joint
20 × H-2
$1.45
Black Outer Corner Joint
16 × H-3
$1.52
Black Cross Junction Joint
34 × H-4
$1.39
Black Intersection Joint
16 × H-7
$0.92
Black Parallel Joint
32 × H-13
$1.13
Black 45 Angle A Joint
16 × H-17
$1.19
Black 45 Angle B Joint
16 × H-18
$1.19
Black Plastic End Cap For Pipe
18 × AP-ICAP
$0.18
Steel Zinc Adjustable Inner Foot
10 × AF-ILEV
$3.78
Black Zinc Bolt For Joint Sets
170 × M6-25B
$0.10
Black Zinc Nut
170 × M6-N
$0.08
Steel Zinc Upper Caster Bracket
16 × WF-UP
$1.25
Steel Zinc Lower Caster Bracket
16 × WF-LOW
$1.25
Bolt With Washer For Bolt-On Casters
16 × F-CASTER
$0.20
The R40-RT96 is an ESD metal conveyor frame with black plastic wheels.
30 × R40-RT96
$31.00
The R40-TU is an ESD steel zinc track union used to make conveyor extensions. The perpendicular pipe junction allows for an angle of inclination up to 45 degrees by folding the conveyor support.
6 × R40-TU
$4.38
R40-GUIDE is a lateral 96" long black polyethylene ESD guide for containers. This part is used for keeping containers moving straight on the rails of a long flow rack.
4 × R40-GUIDE
$28.97
The HJ-MS is a metal single connector used to create sliding pipes. This accessory works best with the HJ-DS, and together they make it possible to create angled pipes that let you slide all sorts of bins, boxes, and surfaces.
24 × HJ-MS
$2.70
he HJ-DS is an all-in-one metal connector used to build sliding pipes. This part works well with the HJ-MS to create sliding pipes for the transportation of boxes, bins, and even surfaces.
24 × HJ-DS
$2.70
Tapping Screw
200 × F-A85/8
$0.10
4" Rigid Bolt-On Caster.
8 × C-4BO-R
$17.00
4" Swivel Bolt-on Caster With Lock.
8 × C-4BO-L
$24.00
SKU: Flow-Kit Category:

Description

What’s included:

  • Most frequently used parts to build the structures, in sufficient quantity and ratio count
  • Structure-specific components (e.g. conveyors for flow racks)

Options:

  • Tube color
  • Customized changes to part list

Benefits

  • Best way to ease your team into using this equipment
  • No more headaches of making sure that you have all the necessary parts
  • Can build 4 or 5 sizeable structures with the parts included
  • No unnecessary leftover units

You will need

  • Tool to cut your pipe to the desired length. If you don’t have any saw at your facility, we recommend the following cheap tool to start: T-CUTTER

Related products