Nichols Material Handling

Home/Shop/Starter Kits/Large-Kit
Contains all the tubes, connectors, casters, and accessories needed to build from 6 to 10 modular structures according to your needs. Best way to ease your team into using our tube and joint system.

Large-Kit

From $7,187.23

Contains all the tubes, connectors, casters, and accessories needed to build from 6 to 10 modular structures according to your needs.

8' Pipe Available In Various Colors To Purchase In Our Online Shop.
140 × 8' Pipe
Clear
$8.61 – $11.55
8' Stainless Steel Pipe
10 × 8' Pipe - Stainless (ESD)
$11.55
The R40-RT96 is an ESD metal conveyor frame with black plastic wheels.
36 × R40-RT96
$25.86
The R40-MS is an ESD steel zinc conveyor mount commonly used at the starting point of roller tracks. This item serves as an anchor between the conveyor and a perpendicular pipe.
60 × R40-MS
$2.05
The R40-TU is an ESD steel zinc track union used to make conveyor extensions. The perpendicular pipe junction allows for an angle of inclination up to 45 degrees by folding the conveyor support.
5 × R40-TU
$3.74
Track Mount Drop Stop Steel Zinc.
60 × R40-DS
$2.29
The R40-TC is an ESD metal track connector to make conveyor extensions. You can use this part to extend an 8-foot track up to 16ft.
4 × R40-TC
$2.38
R40-GUIDE is a lateral 96" long black polyethylene ESD guide for containers. This part is used for keeping containers moving straight on the rails of a long flow rack.
6 × R40-GUIDE
$24.16
R40-SGUIDE is a central straight 96 inches long black polyethylene ESD guide for containers. This part is used for keeping containers moving straight on the rails of a long flow rack.
6 × R40-SGUIDE
$24.75
Black Tee Joint
760 × H-1
$0.77
Black Inner Corner Joint
150 × H-2
$1.21
Black Outer Corner Joint
150 × H-3
$1.27
Black Cross Junction Joint
150 × H-4
$1.16
Black Pivot Point Joint
8 × H-5
$0.69
Black Pivot Extension Joint
8 × H-6
$0.71
Black Intersection Joint
16 × H-7
$0.77
Black Flat Anchor Joint
18 × H-9
$1.24
Black Tee Hinge Joint
12 × H-12
$0.97
Black Parallel Joint
86 × H-13
$0.95
Black Upper Clamp Joint
2 × H-15
$1.07
Black Lower Clamp Joint
2 × H-16
$1.07
Black 45 Angle A Joint
16 × H-17
$1.00
Black 45 Angle B Joint
16 × H-18
$1.00
Black Double Pipe Single Hinge Joint
4 × H-23
$1.09
Black 90 Degree Round Joint
8 × H-90
$1.26
Pipe Mount Start
12 × HJ-MS
$2.26
Pipe Mount Drop Stop
12 × HJ-DS
$2.26
Black Plastic End Cap For Pipe
51 × AP-ICAP
$0.15
Round Plastic Bracket For Pipe
11 × AP-Hinge
$0.34
Steel Zinc Adjustable Inner Foot
14 × AF-ILEV
$3.15
Steel Zinc Adjustable Outer Foot
4 × AF-OLEV
$3.15
Steel Zinc Stanchion Mount
4 × AF-OSM
$5.59
Black Shim For Leveling Surfaces
50 × AO-SHIM
$0.20
Steel Zinc Single Pipe Clamp
36 × AO-EMT1
$0.22
Steel Zinc Double Pipe Clamp
22 × AO-EMT2
$0.22
Steel Zinc Corner Bracket
16 × AI-CORNER
$2.44
Steel Zinc Embed Pipe Support
12 × AI-CENTER
$2.38
Steel Zinc Pipe Rest
2 × AS-REST
$3.25
Steel Zinc Quick Release Latch
1 × AC-STRAP
$5.95
Steel Zinc Tool Holder
1 × AW-HOLDER
$10.25
24" Steel Drawer Slides
1 × FL-COU14-100lbs
$20.23
24" Steel Drawer Slides
1 × FL-COU24-100lbs
$24.99
Steel Zinc Bracket Slides
14 × FL-COU-U
$0.71
White HDPE Plastic
4 × High Density Polyethylene - White, 1/2"
$248.00
White HDPE Plastic
3 × High Density Polyethylene - White, 1/4"
$157.00
Black Zinc Bolt For Joint Sets
716 × M6-25B
$0.09
Black Zinc Nut
718 × M6-N
$0.07
Black Steel Zinc Bolt For HJ-15 Joint Set
2 × M6-12B
$0.09
Steel Zinc Upper Caster Bracket
56 × WF-UP
$1.04
Steel Zinc Lower Caster Bracket
56 × WF-LOW
$1.04
Bolt With Washer For Bolt-On Casters
56 × F-CASTER
$0.20
3" Stem Swivel Caster With Lock.
12 × W-3ESB
$12.31
4" Swivel Stem Caster With Lock.
8 × C-4ST-L
$14.00
4" Stem Rigid Caster.
2 × C-4ST-R
$18.00
4" Swivel Bolt-on Caster With Lock.
18 × C-4BO-L
$24.00
4" Rigid Bolt-On Caster.
6 × C-4BO-R
$17.00
6" Bolt-On Swivel Caster With Lock.
2 × C-6BO-L
$32.00
6" Bolt-On Rigid Caster.
2 × C-6BO-R
$24.00
Tapping Screw
400 × F-A85/8
$0.09
Screw For Shelving
200 × F-SF81
$0.09
Screw
200 × F-S81/2
$0.09
Category:

Description

Benefits

  • Best way to ease your team into using this equipment
  • No more headaches of making sure that you have all the necessary parts
  • Can build from 6 to 10 sizeable structures with the parts included
  • No unnecessary leftover units

Options

  • Ability to choose tube color

What’s included

  • Most frequently used parts to build the structures, in sufficient quantity and ratio count

You will need

  • Tool to cut your pipe to the desired length. If you don’t have any saw at your facility, we recommend the following cheap tool to start: T-CUTTER

Related products